Publications

  • Y. Li*, T. Colnaghi, Y. Gong*, H. Zhang, Y. Yu, Y. Wei, B. Gan, M. Song, A. Marek, M. Rampp, S. Zhang, Z. Pei, M. Wuttig, J. Neugebauer, Z. Wang* and B. Gault*. ‘Machine learning-enabled tomographic imaging of chemical short-range atomic ordering’, under review.
  • J. Liu*, B-S. Li, H. Gardner, Y. Gong, F. Liu, G. He, M. Moorehead, C. Parkin, A. Couet, A.J. Wilkinson and D.E.J. Armstrong*. ‘Origin of Age Softening in the Refractory High-Entropy Alloys’, Science Advances 9, 49 (2023). doi: 10.1126/sciadv.adj1511.
  • Y. Li*, Y. Wei, Z. Wang*, T. Colnaghi, L. Han, Z. Rao, X. Zhou, L. Huber, R. Dsouza, Y. Gong, J. Neugebauer, A. Marek, M. Rampp, S. Bauer, H. Li, I. Baker, L. Stephenson and B. Gault*. ‘Quantitative three-dimensional imaging of chemical short-range order via machine learning enhanced atom probe tomography’, Nature Communications 14, 7410 (2023). doi: 10.1038/s41467-023-43314-y.
  • Z. Zhang, Q. Ding*, Y. Gong, X. Wei, Z. Zhang* and H. Bei*. ‘Microstructures and Mechanical Properties of a L12-structured precipitation Strengthened Co-based Superalloy‘, Journal of Materials Research and Technology 26, 7789–7802, (2023). doi: 10.1016/j.jmrt.2023.09.154.
  • Y. Gong*, S.P.A. Gill, S. Yan, R. Higginson, J. Sumner, N.J. Simms, H. Larsson, A. Shin, J.M. Pearson, C. Atkinson, A.C.F. Cocks* and R.C. Reed*. ‘Assessment of corrosive attack of Fe9Cr1Mo alloys in pressurised CO2 for prediction of breakaway oxidation’, Corrosion Science 222, 111385, (2023). doi: 10.1016/j.corsci.2023.111385.
  • D. Barba*, A.J. Egan, S. Utada, Y. Gong, Y.T. Tang, V. Mazanova, M.J. Mills and R.C. Reed. ‘Deformation mechanisms rationalisation to design for creep resistance in polycrystalline Ni-based superalloys’, Metallurgical and Materials Transactions A 54A, 1886–1901, (2023). doi: 10.1007/s11661-022-06922-9.
  • Y.T. Tang*, C. Panwisawas, B.M. Jenkins, E. Salvati, Y. Gong, J.N. Ghoussoub, S. Michalik, B. Roebuck, P.A.J. Bagot, M.P. Moody, A.M. Korsunsky, D.M. Collins and R.C. Reed. ‘Nonequilibrium precipitation reactions and incipient recrystallisation in supersaturated nickel-based superalloys produced by additive manufacturing’, Additive Manufacturing 62, 103389, (2023). doi: 10.1016/j.addma.2023.103389.
  • J.N. Ghoussoub*, Y.T. Tang, W.J.B. Dick-Cleland, A.A.N. Németh, Y. Gong, D.G. McCartney, A.C.F. Cocks and R.C. Reed. ‘On the influence of alloy composition on the additive manufacturability of Ni-based superalloys’, Metallurgical and Materials Transactions A 47, 102339, (2023). doi: 10.1007/s11661-021-06568-z.
  • C. Panwisawas*, Y. Gong, Y.T. Tang, R.C. Reed and J. Shinjo. ‘Additive manufacturability of superalloys: Process-induced porosity, cooling rate and metal vapour’, Additive Manufacturing 47, 102339, (2021). doi: 10.1016/j.addma.2021.102339.
  • Y.T. Tang, C. Panwisawas, J.N. Ghoussoub, Y. Gong, J. Clark, A.A.N. Németh, D.G. McCartney and R.C. Reed*. ‘Alloys-By-Design: Application to New Superalloys for Additive Manufacturing’, Acta Materialia 202, 417–436, (2021). doi: 10.1016/j.actamat.2020.09.023.
  • Y. Gong*, D.J. Young, C. Atkinson, T. Olszewski, W.J. Quadakkers and R.C. Reed. ‘Modelling of the degradation of martensitic stainless steels by the Boudouard reaction’, Corrosion Science 173, 108699, (2020). doi: 10.1016/j.corsci.2020.108699.
  • X. Zhang, B. Grabowski*, F. Körmann, A.V. Ruban, Y. Gong, R.C. Reed, T. Hickel and J. Neugebauer. ‘Temperature dependence of the stacking fault Gibbs energy for Al, Cu and Ni’, Physical Review B 98, 224106, (2018) [PRB Editors’ Suggestions]. doi: 10.1103/PhysRevB.98.224106.
  • P.A.J. Bagot*, A. Radecka, A.P. Magyar, Y. Gong, D.C. Bell, G.D.W. Smith, M.P. Moody, D. Dye and D. Rugg. ‘The effect of oxidation on the subsurface microstructure of a Ti-6Al-4V alloy’, Scripta Materialia 148, 24–28, (2018). doi: 10.1016/j.scriptamat.2018.01.015.
  • Y. Gong, B. Grabowski, A. Glensk, F. Körmann, J. Neugebauer and R.C. Reed*. ‘Temperature dependence of the Gibbs energy of vacancy formation of fcc Ni’, Physical Review B 97, 214106 (2018). doi: 10.1103/PhysRevB.97.214106.
  • H. Larsson*, T. Jonsson, R. Naraghi, Y. Gong, R.C. Reed and J. Ågren. ‘Oxidation of iron at 600 C – experiments and simulations’, Materials and Corrosion 68 133–142, (2017). doi: 10.1002/maco.201508781.
  • Y. Gong, D.J. Young, P. Kontis, M.P. Moody, Y.L. Chiu, A. Shin, J.M. Pearson, H. Larsson and R.C. Reed*. ‘Breakaway Oxidation of Fe-9Cr1Mo Steel in CO2: Characterisation and Modelling’, Acta Materialia 130, 361–374, (2017). doi: 10.1016/j.actamat.2017.02.034.
  • P. Kontis, S. Pedrazzini, Y. Gong, P.A.J. Bagot, M.P. Moody and R.C. Reed*. ‘The effect of boron on oxide scale formation in a new polycrystalline superalloy’, Scripta Materialia 127, 156–159, (2017). doi: 10.1016/j.scriptamat.2016.09.013.
  • X. Wu, Z. Yu*, X. You, M. Tian and Y. Gong. ‘Characterization of diamond films deposited on Re substrate by magnetic field-assisted hot filament chemical vapour deposition’, Applied Surface Science 258, 2117–2120, (2011). doi: 10.1016/j.apsusc.2011.03.131.
  • X. Wu*, Z. Yu, Y. Gong, J. Wang and M. Tian. ‘Diamond film growth on the Mo-Re alloy foil’, Journal of Crystal Growth 314, 58–61, (2010). doi: 10.1016/j.jcrysgro.2010.10.008.