- Modelling of the degradation of Fe9Cr steels in high-temperature CO2
Yilun Gong*, Henrik Larsson, Colin Atkinson, and Roger C. Reed
Journal of Phase Equilibria and Diffusion, under review
- Near-theoretical strength and deformation stabilization achieved via grain boundary segregation and nano-clustering of solutes
C. Liu, J. Rao, Z. Sun, W. Lu, J.P. Best, X. Li, W. Xia, Y. Gong, Y. Wei, B. Zhang, J. Ding, G. Wu and E. Ma
Nature Communications 15, 9283 (2024).
- Towards Establishing Best Practice in the Analysis of Hydrogen and Deuterium by Atom Probe Tomography
B. Gault* et al
Microscopy and Microanalysis, ozae081 (2024).
- Machine learning-enabled tomographic imaging of chemical short-range atomic ordering
Y. Li*, T. Colnaghi, Y. Gong*, H. Zhang, Y. Yu, Y. Wei, B. Gan, M. Song, A. Marek, M. Rampp, S. Zhang, Z. Pei, M. Wuttig, S. Ghosh, F. Körmann, J. Neugebauer, Z. Wang* and B. Gault*
Advanced Materials 36(44), 2407564 (2024).
- Designing complex concentrated alloys with quantum machine learning and language modeling
Zongrui Pei*, Yilun Gong, Xianglin Liu, and Junqi Yin
Matter 7(10), 3433-3446, (2024).
- Melting properties of the refractory metals V and W and the binary VW alloy fully from first principles
L.-F. Zhu*, P. Srinvasan, Y. Gong, T. Hickel, B. Grabowski, F. Körmann and J. Neugebauer
Physical Review B 109, 094110, (2024).
- Origin of Age Softening in the Refractory High-Entropy Alloys
J. Liu*, B-S. Li, H. Gardner, Y. Gong, F. Liu, G. He, M. Moorehead, C. Parkin, A. Couet, A.J. Wilkinson and D.E.J. Armstrong*
Science Advances 9, 49, (2023).
- Quantitative three-dimensional imaging of chemical short-range order via machine learning enhanced atom probe tomography
Y. Li*, Y. Wei, Z. Wang*, T. Colnaghi, L. Han, Z. Rao, X. Zhou, L. Huber, R. Dsouza, Y. Gong, J. Neugebauer, A. Marek, M. Rampp, S. Bauer, H. Li, I. Baker, L. Stephenson and B. Gault*
Nature Communications 14, 7410 (2023).
- Microstructures and Mechanical Properties of a L12-structured precipitation Strengthened Co-based Superalloy
Z. Zhang, Q. Ding*, Y. Gong, X. Wei, Z. Zhang* and H. Bei*
Journal of Materials Research and Technology 26, 7789–7802, (2023).
- Assessment of corrosive attack of Fe9Cr1Mo alloys in pressurised CO2 for prediction of breakaway oxidation
Y. Gong*, S.P.A. Gill, S. Yan, R. Higginson, J. Sumner, N.J. Simms, H. Larsson, A. Shin, J.M. Pearson, C. Atkinson, A.C.F. Cocks* and R.C. Reed*
Corrosion Science 222, 111385, (2023).
- Deformation mechanisms rationalisation to design for creep resistance in polycrystalline Ni-based superalloys
D. Barba*, A.J. Egan, S. Utada, Y. Gong, Y.T. Tang, V. Mazanova, M.J. Mills and R.C. Reed
Metallurgical and Materials Transactions A 54A, 1886–1901, (2023).
- Multi-length-scale study on the heat treatment response to supersaturated nickel-based superalloys: Precipitation reactions and incipient recrystallisation
Y.T. Tang*, C. Panwisawas, B.M. Jenkins, E. Salvati, Y. Gong, J.N. Ghoussoub, S. Michalik, B. Roebuck, P.A.J. Bagot, M.P. Moody, A.M. Korsunsky, D.M. Collins and R.C. Reed
Additive Manufacturing 62, 103389, (2023).
- On the influence of alloy composition on the additive manufacturability of Ni-based superalloys
J.N. Ghoussoub*, Y.T. Tang, W.J.B. Dick-Cleland, A.A.N. Németh, Y. Gong, D.G. McCartney, A.C.F. Cocks and R.C. Reed
Metallurgical and Materials Transactions A 47, 102339, (2023).
- Additive manufacturability of superalloys: Process-induced porosity, cooling rate and metal vapour
C. Panwisawas*, Y. Gong, Y.T. Tang, R.C. Reed and J. Shinjo
Additive Manufacturing 47, 102339, (2021).
- Alloys-By-Design: Application to New Superalloys for Additive Manufacturing
Y.T. Tang, C. Panwisawas, J.N. Ghoussoub, Y. Gong, J. Clark, A.A.N. Németh, D.G. McCartney and R.C. Reed*
Acta Materialia 202, 417–436, (2021).
- Rationalisation of the Micromechanisms Behind the High-Temperature Strength Limit in Single-Crystal Nickel-Based Superalloys
D. Barba*, A.J. Egan, Y. Gong, M.J. Mills, and R.C. Reed
In: Tin, S., et al. Superalloys 2020. The Minerals, Metals & Materials Series. Springer, Cham.
- Modelling of the degradation of martensitic stainless steels by the Boudouard reaction
Y. Gong*, D.J. Young, C. Atkinson, T. Olszewski, W.J. Quadakkers and R.C. Reed
Corrosion Science 173, 108699, (2020).
- Temperature dependence of the stacking fault Gibbs energy for Al, Cu and Ni
X. Zhang, B. Grabowski*, F. Körmann, A.V. Ruban, Y. Gong, R.C. Reed, T. Hickel and J. Neugebauer
Physical Review B 98, 224106, (2018) [PRB Editors’ Suggestions].
- The effect of oxidation on the subsurface microstructure of a Ti-6Al-4V alloy
P.A.J. Bagot*, A. Radecka, A.P. Magyar, Y. Gong, D.C. Bell, G.D.W. Smith, M.P. Moody, D. Dye and D. Rugg
Scripta Materialia 148, 24–28, (2018).
- Temperature dependence of the Gibbs energy of vacancy formation of fcc Ni
Y. Gong, B. Grabowski, A. Glensk, F. Körmann, J. Neugebauer and R.C. Reed*
Physical Review B 97, 214106 (2018).
- Oxidation of iron at 600 ◦C – experiments and simulations
H. Larsson*, T. Jonsson, R. Naraghi, Y. Gong, R.C. Reed and J. Ågren
Materials and Corrosion 68 133–142, (2017).
- On the breakaway oxidation of Fe9Cr1Mo steel in high pressure CO2
Y. Gong, D.J. Young, P. Kontis, M.P. Moody, Y.L. Chiu, A. Shin, J.M. Pearson, H. Larsson and R.C. Reed*
Acta Materialia 130, 361–374, (2017).
- The effect of boron on oxide scale formation in a new polycrystalline superalloy
P. Kontis, S. Pedrazzini, Y. Gong, P.A.J. Bagot, M.P. Moody and R.C. Reed*
Scripta Materialia 127, 156–159, (2017).
- Characterization of diamond films deposited on Re substrate by magnetic field-assisted hot filament chemical vapour deposition
X. Wu, Z. Yu*, X. You, M. Tian and Y. Gong
Applied Surface Science 258, 2117–2120, (2011).
- Diamond film growth on the Mo-Re alloy foil
X. Wu*, Z. Yu, Y. Gong, J. Wang and M. Tian
Journal of Crystal Growth 314, 58–61, (2010).